Dibond Signs
3mm aluminium composite material
Can be supplied as single or double-sided
Extremely durable
Maximum board size: 2440mm × 1220mm (equivalent to 8ft × 4ft) in one piece
Fully recyclable
Square cut as standard
Maximum board size: 2400mm × 1200mm (approx. just under 8ft × 4ft) in one piece
Correx Signs
Trimmed sides as standard
Light-weight and easy to install
Flexible and durable, can be stuck, screwed, nailed or riveted to any suitable surface
Suitable for both indoor and outdoor use
Maximum board size: 2400mm × 1200mm (approx. just under 8ft × 4ft) in one piece
Foamex Signs
3mm or 5mm rigid Foamex available
Can be supplied as single or double-sided
M1/B1 fire-rated to comply with UK and European fire safety standards
Trimmed sides as standard
Lightweight and easy to install
Flexible and durable, can be stuck, screwed, nailed or riveted to any suitable surface
Suitable for both indoor and outdoor use
Maximum board size: 2440mm × 1220mm (equivalent to 8ft × 4ft) in one piece
Roll Ups
- Includes graphic 0.85m/1m/1.5m/2m wide × 2m high (850mm/1000mm/1500mm/ 2000mm × 2000mm)
- Bespoke-printed graphic printed on 400gsm anti-curl, anti-scuff, anti-glare SoFlat
- Robust, compact, ergonomic design
- Snap-clip top rail
- Includes carry bag
Swing Boards
- Gloss white aluminium panel (430 x 625mm) - ideal for direct to surface print or vinyl graphics.
- Alternative top opening polycarbonate double sided A3 poster pocket with magnetic seals.
- Poster pocket designed with header area for permanent branding - ideal for either direct to surface print or vinyl graphics.
- Stylish 32mm round steel tube frame – available in black or white from stock.
- Solid black recycled PVC base provides excellent stability.
Canvas Banners
Single-sided, double-sided, scaffold banners
440gsm, 500gsm & 760gsm PVC
440gsm is the most popular weight of banner and has a multitude of uses at a variety of events, such as advertising banners, street campaign/event banners, corporate event banners, sporting event banners, birthday banners, party banners, etc.
- Industry standard banner-grade PVC
- Suitable for both indoor and outdoor use
- Flame-resistant to DIN4102
- High-quality full-colour print
- Standard finishing included
- Printed with fade-proof UV-based inks
Each banner is printed and finished to your requirements.
Crest Flag
- Superb quality flags that your customers will be delighted with. Printed onto 117gsm Knitted Polyester with dye-sublimation process resulting in 80-90% show-through on the reverse.
- Suitable for both outdoor and indoor use
- Lightweight, portable and easy to assemble
- Printed using a dye-sublimation process for great show-through on the reverse
- Includes high-performance aluminium and GRP poles (collapsible into multiple pieces)
- Available in four sizes from 2210mm - 4350mm
- Multiple options for bases (not included)
- Stable up to beaufort scale: 4 (13-18 mph)
Sleeve Colour
Our flags are fitted with black sleeves as standard. However, white sleeves are available at no extra cost. If you require a white sleeve, please let us know when placing your order.
Front-Facing Orientation
As standard, our single-sided flag templates are setup to have the front face of the design with the base and pole on the left-hand side. However, you are welcome to supply your artwork with the template shapes flipped horizontally in order to have the front face of the design with the base and pole on the right-hand side. If this is required, please only flip the template shapes - not the flag design itself.
Double-Sided Flags
These consist of two knitted polyester flags with a blockout membrane sandwiched between the two. All three layers are stitched together and supplied as one item.
Please note, our flag bases are not intended to support the additional weight of double-sided flags. For this reason, flag bases are not covered by our warranty when used with double-sided flags.
Teardrop Flag
Superb quality flags that your customers will be delighted with. Printed onto 117gsm Knitted Polyester with dye-sublimation process resulting in 80-90% show-through on the reverse.
- Suitable for both outdoor and indoor use
- Lightweight, portable and easy to assemble
- Printed using a dye-sublimation process for great show-through on the reverse
- Includes high-performance aluminium and GRP poles (collapsible into multiple pieces)
- Available in four sizes from 2210mm - 4350mm
- Multiple options for bases (not included)
- Stable up to beaufort scale: 4 (13-18 mph)
Sleeve Colour
Our flags are fitted with black sleeves as standard. However, white sleeves are available at no extra cost. If you require a white sleeve, please let us know when placing your order.
Front-Facing Orientation
As standard, our single-sided flag templates are setup to have the front face of the design with the base and pole on the left-hand side. However, you are welcome to supply your artwork with the template shapes flipped horizontally in order to have the front face of the design with the base and pole on the right-hand side. If this is required, please only flip the template shapes - not the flag design itself.
Double-Sided Flags
These consist of two knitted polyester flags with a blockout membrane sandwiched between the two. All three layers are stitched together and supplied as one item.
Please note, our flag bases are not intended to support the additional weight of double-sided flags. For this reason, flag bases are not covered by our warranty when used with double-sided flags.
Replacement Graphics
Need a new graphic without the pole? Replacement graphics are available at a reduced cost. Printed, finished and delivered direct to you or your client.